EU-Logo
Innomar's R&D is co-funded by the European Union (European Regional Development Fund)

 

Surveys in Deep Water

There are some Innomar SBP models intended mainly for work in deeper waters for offshore projects:

 

Deep Water Data Examples

The following echo plots show some data examples obtained in water depths between about 1,500 and more than 5,000 metres.

Innomar medium-100 SBP data example from deep water (water depth about 2,200m)
"Innomar medium-100"  parametric sub-bottom profiler data example in deep water
(range 1,720–1,830m; sediment penetration about 10m; frequency 5kHz; pulse width 0.8ms).

Innomar SBP data example from deep water (water depth about 3,600-3,900m)
"Innomar deep-36"  parametric sub-bottom profiler data example obtained off Brazil
(water depth about 3,600–3,900m; range 3,600–4,040m below sea level; frequency 4kHz; pulse width 1.5ms; sediment penetration up to 100m).

Innomar SBP data example from deep water (water depth about 5,200-5,400m)
"Innomar deep-36"  parametric sub-bottom profiler data example obtained off Brazil
(water depth about 5,220–5,420m; range 5,220–5,500m below sea level; frequency 5kHz; pulse width 1.2ms; sediment penetration up to 80m; vessel speed about 11 knots).

 

Installation Examples

Innomar medium-100 SBP transducer mounted at a pole Innomar medium SBP transceiver unit
Innomar medium SBP transducer flush-mounted at the hull

"Innomar medium-100" SBP installation examples: transceiver unit (top right), transducer mounted flush with the ship's keel (bottom right) and transducer mounted at a pole that can be lowerde from the ship's keel (left).

 

symbol

Related User Publications