Innomar SES-2000 medium-70 SBP
The Innomar SES-2000 medium-70 parametric sub-bottom profiler is designed for offshore applications down to 2,500m water depth.
This model is available in two versions. The basic version features heave and roll compensation while the "POM" version offers additional pitch compensation.
The Innomar SES-2000 medium-70 SBP acquires full-waveform data that can be processed with any seismic software (SEG-Y format). Innomar also provides the ISE post-processing software specialized on the Innomar SES-2000 SBP data.
|Water Depth Range||2 – 2,500 m|
|Sediment Penetration||up to 100 m (depending on sediment type and noise)|
|Range / Layer Resolution||approx. 1 cm / up to 8 cm|
|Transmit Beam Width (-3dB)||approx. ±1.5° / footprint <5.5% of water depth|
|Primary Frequencies (PF)||approx. 70 kHz (frequency band 60 – 80 kHz)|
|PF Source Level / Acoustic Power||>246 dB//µPa re 1m / ~7.5 kW|
|Secondary Low Frequency (SLF)||centre freq. user selectable: 3, 4, 5, 6, 8, 10, 12 kHz(total frequency band 1.5 – 15 kHz)|
|Pulse Width||user selectable 0.1 – 5 ms|
|Pulse Type||Ricker, CW, LFM chirp|
|Ping Rate||up to 40 pings/s|
|Topside Unit (Transceiver)||W 0.52m × D 0.50m × H 0.74m (19''/16U) / 90kg|
|Transducer (30m cable)||W 0.60m × D 0.60m × H 0.25m / 150kg (excl. cable)|
|Heave / Roll / Pitch Compensation||heave, roll, opt. pitch (depending on external sensor data)|
|Data Acquisition||digital 24 bit @ 96 kHz sample rate; PF 70 kHz envelope echosounder data / bottom track;SLF full-waveform sub-bottom data|
|Auxiliary Input||GNSS, HRP sensor, trigger|
|Auxiliary Output||trigger, bottom track, analogue SLF|
|Power Supply||100–240 V AC / <750 W|
- Roll beam stabilization
- 24 bit SLF full waveform data acquisition (sub-bottom data)
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- LFM chirp (full SLF bandwidth)
- Pitch beam stabilization
- Bottom slope control
- SESWIN data acquisition software
- SES Convert data converter software (SES/RAW to SEG-Y, XTF, ASCII)
- SES NetView for display of online echoprints and system information on remote computers (via Ethernet) for QC
- ISE post-processing software incl. GIS module
Technical specifications are subject of change without notice.